Tutorials and Model Library
Visual-Weld(CSM)_V2025.0 : Tutorial_04 Arc Welding Capabilities
You will learn how to apply clamps on deformed geometry, special clamping sequence definition, and how to define symmetry.
Welding & Assembly
Basic
Visual-Weld(CSM)_V2025.0 : Tutorial_05 Effective Utlization of Tools
T joint welding between 2 components and clamping is applied through the modeling of real tools. You will learn how to define clamping using tools and contacts between components.
Welding & Assembly
Advanced
Visual-Weld(CSM)_V2025.0 : Tutorial_06 Batch Bead Meshing of Subframe
Model the welding between 3 shell components using shell wires. Locators are also introduced for the clamping condition.
Welding & Assembly
Advanced
Visual-Weld(CSM)_V2025.0 : Tutorial_07 Variable Velocity & Power
This tutorial describes the feature "Definition of Variable Velocity and Power". Model a simplified rim assembly with a laser-beam welding heat source.
Welding & Assembly
Advanced
Visual-Weld(CSM)_V2025.0 : Tutorial_08 Imposed Thermal Cycle
In this tutorial, you will learn how to create a Thermal Cycle, how to define an "Imposed Thermal Cycle" in the weld definition, and how to post-process the results with Section Cut.
Welding & Assembly
Advanced
Visual-HeatTreatment_V2025.0 : Tutorial_01 Basic Operations
This tutorial describes in brief the general features of Visual-Heat Treatment, including Graphical User Interface, Menus, and Explorer operations.
Welding & Assembly
Basic
Visual-HeatTreatment_V2025.0 : Tutorial_02 Basic 2D Mesh Creation
This tutorial will help you to learn all the basic features of Visual-Mesh for heat treatment simulation.
Welding & Assembly
Basic
Visual-HeatTreatment_V2025.0 : Tutorial_03 2D Case Hardening Gear
This tutorial will help you to learn to set up the model for Heat Treatment simulation for a simple 2D case (Defining the Heat Treatment simulation, Job Submission, Post Processing of Results, Plotting).
Welding & Assembly
Basic
Visual-HeatTreatment_V2025.0 : Tutorial_04 Basic 3D Mesh creation
This tutorial illustrates how to create and mesh a 3D_Visual_Socket model in Visual-Mesh and later provides you with the way to set up the simulation for the heat treatment scenario in Visual-Heat Treatment.
Welding & Assembly
Basic
Visual-HeatTreatment_V2025.0 : Tutorial_05 Quenching Simumation for 3D Socket
The objective of this tutorial is to demonstrate how to set up the model for heat treatment simulation for a 3D Socket Quenching case (Defining the Heat Treatment simulation, Job Submission, Post Processing of Results, and Plotting).
Welding & Assembly
Advanced