Tips & Tricks

How to Compare the Model Setup Between Two DTF Files

Have you ever wanted to find the differences between two DTF files? If you have, then you will probably be interested in a DTF utility included in your ESI Software installation. The utility is called dtf_diff and can be found in your UTILS_2009.0/bin directory.

CFD-ACE+ and CFD-TOPO Coupling

There is a growing demand and challenge in different industries, especially semiconductor and MEMS areas, to have increased wafer size with reduced feature size, i.e. high quality process uniformity.

Understanding cell-splitting in CFD-VisCART and its effect on cell count

A grid created in CFD-VisCART will have a high percentage of Cartesian cells (100% for Stair-Step Mesh; as high as 90-95% for Projected Mesh). Since these form the bulk of the grid, it helps to make sure that these cells are built in an efficient manner.

Using CFD-VisCART in Batch Mode

CFD-VisCART allows you to handle extremely complex geometries with lots of details. Often, you may have a geometry that you only modify slightly, but would like to use the mesh parameters that you used previously. In order to make this very simple, a batch mode was implemented for CFD-VisCART v2006.

Splitting a Model in CFD-VisCART

CFD-VisCART is a 3D unstructured adaptive Cartesian mesh generator. It is ideally suited for external aerodynamics and automotive underhood applications involving extremely complex geometries. Models/geometries in SAT, Parasolid, STL, Nastran, 3DS, Plot3d and FAST formats can be imported into CFD-VisCART.

Grouping Objects in CFD-VisCART

When handling complex geometries in CFD-VisCART, the list of geometric surface can quickly become very large and make the management of the model rather tricky.

DTF utility: the -vd and -ud options

The DTF utility offers several options for viewing and manipulating simulation data in a DTF file. Simulation data is essentially all settings that are not Volume Conditions or Boundary Conditions. By using a couple of DTF commands, you can update the data in the DTF file without opening it in CFD-ACE-GUI. In this tip, we will demonstrate how to use the -vd and -ud options of the DTF utility.

CFD-TOPO: A Tool for Feature Scale Simulation of Semiconductor Processes

CFD-TOPO is a simulation tool that predicts how the shape of entities change due to the combined effects of chemical species transport and surface reactions at gas-solid interfaces. This application provides a wide array of tools to analyze the steps of a semiconductor process on the feature scale of a device (typically the order of micro-meter).