Tips & Tricks

Transparency Feature in CFD-GEOM

In CFD-GEOM, certain entities can now be set to transparent. This option allows you to add transparency effects to your surfaces, faces, and volumes. This can be an excellent way to add shadows/colors and glass effects to the model.

Using the Construction Plane in CFD-GEOM

Point entities in CFD-GEOM are placed in an XYZ (Cartesian) coordinate system. The Construction Plane tool enables you to position a plane in space, and place points on that plane to generate curve entities.

CFD-GEOM Viewer Hot Keys

Most of the time users deal with real world problems which are usually 3D. 3D geometries and grid generation can be difficult to mesh depending on the complexity of the geometry. Working with 3D geometry and grid generation can be made lot faster with effective use of the Hot Keys available in CFD-GEOM.

Surface Projection in CFD-GEOM

The Project Surface tool of CFD-GEOM allows the projection of a single surface onto a collection of surfaces. The collection of surfaces may contain gaps and overlaps, and the resulting projected surface will then covers these imperfections.

Using Radial Extrusion in CFD-GEOM

The Radial Extrusion tool allows you to extrude structured faces and unstructured surface grids about a specified axis. Extrusion is performed radially about a user-specified axis, typically the center line of the collection of entities being extruded. A variety of options exist for specifying the reference axis and for controlling certain aspects of the extrusion.

Using Interior Sources for Mesh Control in CFD-GEOM

To produce accurate simulation results, it is important to provide adequate mesh resolution in the areas of the model where steep solution gradients are expected. In CFD-GEOM, there are a number of tools available to achieve mesh refinement. One such tool for refining unstructured grids is the interior source option.

CFD-GEOM Filters

Sometimes during the creation of a geometric model it is possible to have overlapping (duplicate) points, line, edges, and faces. This can also occur when CAD files are imported into CFD-GEOM. The user usually finds this situation when trying to do additional operations in CFD-GEOM.

Structured grid in a triangle using CFD-GEOM

CFD-GEOM can create a structured face on a geometry using four edge sets that form a closed circuit. If less than four edge sets are present for the geometry, for example three in a triangle, CFD-GEOM will create a degenerate face at the intersection of the first and third edge sets, as shown Figure 1.

Face Projection on a NURBS Surface in CFD-GEOM

CFD-GEOM provides a face projection tool that enables you to modify grid points such that they adhere to prescribed geometric surfaces. This option is very useful for cases where the underlying surface has curvature in two directions.

Using Parameters to Create Your Geometry in CFD-GEOM

Often, you need run several different cases where you need to modify one or more geometrical values where the overall shape of the entity is the same, only the size changes. In this case, it is useful to use CFD-GEOM scripting for your grid generation, rather than doing it interactively using the GUI.