Tips & Tricks

How to do Export of SolidWorks Objects to PAM-STAMP?

Guidelines to export objects done in SolidWorks and retrieve then maximum information when importing in PAM-STAMP.

Best Practices for Video Rendering (USER)

In this Tips & Tricks document you will find the recommended settings and hints for rendering videos from IC.IDO.

IDO.Present - Media Recording (VIDEO)

This tutorial will show you how to record your VDP / IC.IDO visualization screen. After you have studied this tutorial, you will be able to record your visualization screen and change the format or quality of the rendered video.

What to do before making a die face or meshing an existing die?

Minimize time and maximize result quality on the simulation side by using the stitching tolerances in import options in Visual Mesh and in PAM-STAMP.

How to create and share keyboard shortcut keys?

Tips and tricks to help users to create and share their shortcut keys in PAM-STAMP

How to model Cable Networks & Connectors?

This paper is aimed at describing the modeling process to be applied to the terminal connectors of a Cable Network when focusing on 3D/Multiconductor Transmission Lines (MTL) coupling

How to avoid oscillatory phenomena with short circuited terminals of Cable Networks ?

Cable Networks with short-circuited terminals may exhibit Common-Mode (CM) currents with a highly oscillatory behavior. This article illustrates one solution to eliminate such behavior by considering lossy dielectric coatings varying with the frequency.

FD Interpolating Scheme near Metallic Structures

This article illustrates the PAM-CEM/FD interpolation scheme applied to compute the tangential electric field along wires’ path running near metallic structures (and aimed at avoiding the management of field components on both sides of the surface).

3D/Multiconductor Transmission Lines (MTL) Coupling VS. Stand-Alone FDTD (Accuracy)

This article is aimed at comparing the 3D/Multiconductor Transmission Lines (MTL) coupling accuracy with the PAM-CEM/FD stand-alone use, when applied to simplified wired models. Recommendations for good agreement are also proposed.

How to maximize active view in PAM-STAMP GUI?

Shortcut to maximize the active view