Tips & Tricks

Viewing Your Model in CFD-GEOM

CFD-GEOM has many tools that can make viewing and manipulating your models easier. When you create your model, CFD-GEOM will show the handles for entities that are created. These handles are more like a wire frame representation of the model.

Mirroring Tools in CFD-GEOM

The mirroring tools provided in CFD-GEOM can help in the construction of symmetrical geometries or geometries involving repetitive parts. Ideally, we should take advantage of geometric symmetry to model just one-half or one-fourth of the model or even a 2D axi-symmetric model to reduce the computational time by significantly reducing the size of the model.

Advanced Blanking and Picking Tools in CFD-GEOM

Manipulating very large, complex models can be a challenging task, especially when small features of the geometry are included. CFD-GEOM has many advanced blanking/unblanking tools, as well as advanced picking tools, that can make dealing with large models easier.

How to Generate 3D Hybrid Meshes?

This tip will show you how to create a simple hybrid (structured/tetrahedral) mesh system. A hybrid mesh can be useful when part of the geometry is simple and the other part is to complex to use a structured mesh.

Mixing Structured and Unstructured 2D Grids

One of the most common questions that occurs during CFD-GEOM Training sessions is "How do I generate mixed structured and unstructured grids?" Both grid types have their specific advantages and disadvantages, e.g. structured grids are very efficient in resolving the viscous terms, whereas unstructured grids can be used to handle complex geometries.

Using "Visual Scaling" for Models with Drastically Varying Length Scales

For models that have drastically varying length scales, it can be difficult to create the grid, setup a model, and post-process the results. CFD-GEOM, CFD-ACE-GUI and CFD-VIEW have a "Visual Scale" capability that can significantly help when working with these types of models.

Parametric Studies Using SimManager

Parametric studies are an important aspect of CFD analysis. Parametric studies are used to perform trend base analyses, optimize the deign of a device, and/or to study the affect of different parameters on a process (What if? type analysis).

How to Compare the Model Setup Between Two DTF Files

Have you ever wanted to find the differences between two DTF files? If you have, then you will probably be interested in a DTF utility included in your ESI Software installation. The utility is called dtf_diff and can be found in your UTILS_2009.0/bin directory.

CFD-ACE+ and CFD-TOPO Coupling

There is a growing demand and challenge in different industries, especially semiconductor and MEMS areas, to have increased wafer size with reduced feature size, i.e. high quality process uniformity.

Blanking, Grouping and Selecting Entities in CFD-CADalyzer

When working with models in CFD-CADalyzer, especially the more complicated ones, Blanking, Grouping and Selection tools can considerably simplify model setup and visualization.