- Home
- Resources
- Tips & Tricks
Tips & Tricks
e-Café #1- Construire sa propre carte matière MMAT à l’aide de Visual-Crash PAM
Construire sa propre carte matière MMAT à l’aide de Visual-Crash PAM
Maximilien
Jouy
Virtual Performance
How to Obtain Best Results within Reasonable Time from a Heat Treatment Simulation
Heat treated parts are in most cases not clamped during heat treatment, for an FEM analysis, at least a static determined clamping is needed that does not allow any rigid body motion.
Yonggang
Duan
Welding & Assembly
Stamping/HT Chaining of 3D Ring - Restart tool in Visual Heat Treatment
This article is to show effects of heat treatment on stresses when industrial mechanical parts are stamped (or welded) by 3 typical heat treatment steps: Heating, Quenching and Tempering. Tempering is generally considered effective in relieving stresses induced by quenching in addition to lowering hardness to within a specified range, or meeting certain mechanical property requirements.
Yonggang
Duan
Welding & Assembly
Heat Power display in Visual Weld
The aim of this development in Visual Weld 14.5 + Sysweld 2019.0 is to display the Power Density. Currently, this functionality is only available in the old SysWeld GUI. The new functionality "Heat Power Display" is available through the "Welding Utilities" menu of Visual Weld.
Yonggang
Duan
Welding & Assembly
Conversion Files .fdb in .erfh5 on Network Drive
It is not straightforward to do the conversion Files .fdb in .erfh5 on Network Drive in Visual Viewer. In order to make it work properly, it is necessary to map network drive to the local machine. In this way, the files on network could be handled like on local machine and the conversion from fdb to erf will be working properly.
Yonggang
Duan
Multiphysics, Welding & Assembly
Crash when launching Visual on CentOS
On Linux, at moment of launching Visual-Environmnet, crash happens after having selected Visual Weld. It is possible to try following steps to solve the problem. - Launching Visual in debug mode - Downgrade GlibC to 2.12 - Install freshly NTP
Yonggang
Duan
Virtual Integration Platform, Welding & Assembly
Boundary Layer Mesh tool demonstration
Easily creating a connection between a tetramesh and an hexamesh is possible, using Boundary Layer Mesh tool.
Sandrine
Dischert
Multiphysics, Welding & Assembly, Virtual Integration Platform
Managing Multiple STAGE with Virtual Performance Solution (VPS)
This tip provides some information on the usage of multi stage runs in Virtual Performance Solution (VPS)
Jean-Christophe
Allain
Virtual Performance
Using Inertial Relief
This tip provides some background information on how to model static cases without considering the effect of boundary conditions in Virtual Performance Solution (VPS)
Jean-Christophe
Allain
Virtual Performance
Preloading BOLTS
This tip provides methodology to pre stress elements in Virtual Performance Solution (VPS) to model Bolt assemblies.
Jean-Christophe
Allain
Virtual Performance