PAM-STAMP 2021.0

To view the full version of this page (or to download files), please log in or create a new account


PAM-STAMP 2021.0 30 Jun 2021

PAM-STAMP 2021.0 provides the following new features on top of previous versions :

  • Advanced friction models in Process Editor: Users can now enable advanced friction models in the Process Editor.
  • Ironing is now available in the Process Editor.
  • Reference part : Users can now associate to a blank a reference part that will be used for blank substitution as well as in Post, for example for geometrical distortion analysis.
  • Strategies selection in Process Editor : In Process Editor, it is now possible to select a "setup strategy" that will automatically adjust the most important simulation settings to fit to standard modeling practices. This allows quick switch between for example some feasibility settings to validation settings. Users can create their own strategies and make it as default in the Customize menu.
  • Skidlines contour : Several new contours dedicated to skidlines evaluation have been introduced to allow easy detection of this very specific kinds of cosmetic defects.
  • Strain banding resolution : Some new developments have been done in the solver to resolve the "strain banding" phenomena that was artificially created on the blank in case where a blank with fine mesh was crossing a fillet. This new ability is activated by default, but can be deactivated in the Customize menu.
  • Default master frame : The coordinate system proposed by default in many different features and dialogs is now adjusted to fit mostly, the most relevant one. This is especially remarkable in Views and Section cuts, but also in Tool Editor and various attribute dialogs.
  • Generation of blank outer skin : In POST, user can now ask for generation of the blank outer skin in just one click. Thanks to this new ability, the software will recreate a new object consisting of an offset of the real local blank thickness (computed by the solver) will be added on top of the mid-layer. With this ability, comparison between a simulation result and a scanned part will be quick, easy and very accurate.
  • Edge strain contour : The user can now display in POST, the edge strain of the blank to post-treat edge cracks.
  • Early feasibility for addendum, Wall Opening improvements, Assigned binder for Diestarter.

Please have a look at PAM-STAMP Release Notes and PAM-DIEMAKER for CATIA V5  Release Notes to get more info on the new capabilities.


Software Documentation (PAM-STAMP 2021.0)

PAM-STAMP 2021.0 - Release Notes (PAM-DIEMAKER for CATIA V5 2021.0)
PAM-DIEMAKER_CATIAV5_2021-0_ReleaseNotes_PDF_R37460S20210712T1522Z.zip (214.41 KB)
Download
PAM-STAMP 2021.0 - Release Notes
PAM-STAMP_2021-0_ReleaseNotes_PDF_R36715S20210610T1455Z.zip (1015.39 KB)
Download

Software Files (PAM-STAMP 2021.0)

PAM-STAMP 2021.0 for Windows

Windows 64 Bits
933.78 MB
Full Version
File name: Stamp2021r0_Windows.zip
MD5 : d33e5a4b78f75e910480018f45a82979
Info:

PAM-STAMP User Interface, DMP Solvers and Optimizer for Windows 10

How to install:

Unzip Stamp2021r0_Windows.zip in a temporary directory and execute setup.exe


PAM-STAMP 2021.0 for Linux

Linux 64 Bits (all x86 proc)
846.34 MB
Full Version
File name: Stamp2021r0_Linux.tar.gz
MD5 : 8013ddc6837e286e9c3b7fca28024c23
Info:

PAM-STAMP DMP Solvers and Optimizer for RedHat Linux Enterprise / CentOS 7 to 8 or SUSE Linux Enterprise 12 & 15 Operating Systems running with Intel Xeon based processors

How to install:

Uncompress (tar xvf) Stamp2021r0_Linux.tar.gz in a temporary directory and execute ./INSTALL.SH


PAM-DIEMAKER for CATIA V5 2021

Windows 64 Bits
413.85 MB
Full Version
File name: Diemaker2021r0_CAAv5.zip
MD5 : 9da464e9f3229357143de66ad1e2b0f9
Info:

PAM-DIEMAKER for CATIA V5 2021.0 installer for Windows 10 64-bits

Supported CATIA platforms:

CATIA V5-6R2020

CATIA V5-6R2019

CATIA V5-6R2018

 

How to install:

Unzip Diemaker2021r0_CAAv5.zip in a temporary directory and execute Setup.exe