Tutorials and Model Library
BM-Stamp 2022.0 Tutorials
Several video tutorials with corresponding input data to perform self-training on BM-Stamp.
Sheet Metal Forming
ESI Fender - Clamping Training video
ESI Fender Clamping training video within PAM-STAMP 2021.0
Sheet Metal Forming
How to setup Partial Bearing in PAM-STAMP
Partial Bearing consists in having a grinding allowance on the Binder, but on a small area called Bearing Zone.
Sheet Metal Forming
How to improve the GUI performance of PAM-STAMP on WIN10
Cookbook to improve GUI performance of PAM-STAMP on WIN10 by adjusting some graphical settings
Sheet Metal Forming
How to Create Roll for Roll Library within PAM-STAMP
Guide to create your own Roll in PAM-STAMP
Sheet Metal Forming
Cookbook for Statistical Strain Rate measure in SPF
The aim of the Statistical Strain Rate approach is to eliminate the dependency of the pressure prediction, and consequently the process duration, on the behavior of a single element.
Sheet Metal Forming
How to calibrate EWK from tensile test data
Guidelines to prepare EWK model in PAM-STAMP
Sheet Metal Forming
How to do Assembly
Assembly process is a joining of several parts (two or more) together. Each particular piece of the final assembly is brought with its stresses and deformations from its manufacturing process and together with joining action, which induces internal stresses in parts around joining spots, lead to...
Sheet Metal Forming
How to do Roll Hemming
Roll-hemming is used for the manufacture of low to medium production volumes. The flange of the outer panel is bent over the inner panel in progressive steps by means of the roller hemming head. The process allows the advantage of using the robot controlled hemming head to hem several different c...
Sheet Metal Forming