Technical papers

Metrological determination of inhomogeneous hydrodynamic compaction during unsaturated out-of-plane permeability measurement of technical textiles
Abstract. An out-of-plane permeability measurement system is presented that initially enables monitoring of inhomogeneous hydrodynamic compaction of textiles during impregnation. For this, it provides…
Composites Metrological determination, composites, technical textiles, composite molding process
Advanced modeling and simulation of Sheet Moulding Compound (SMC) processes
Abstract SMC processes involve a highly concentrated dispersion of chopped fibres into a resin, placed into a preheated mould, that closes rapidly (about 40 mm/s) squeezing the reinforced resin, inducing the mould filling…
Composites SMC, Confined orientation, Friction, Parametric solutions, PGD
Use of a cognitive simulation model of the driver to support the Virtual Human Centred Design (V-HCD) of ADAS and automated vehicles
This paper presents a research programme jointly implemented by IFSTTAR and ESI group in order to develop an integrative simulation platform able to support the human centred design of future Advanced Driving Aid…
Virtual Systems & Controls Driver Model, Virtual Human Centred Design, Simulation, ADAS, Vehicle Automation
Compression Resin Transfer Molding (C-RTM) Simulation Using a Coupled Fluid-solid Approach
Composite materials are being used at an increasing rate in the automotive industry due to their superior mechanical properties at low densities leading to lightweight components.  Continuing this trend requires the…
Composites
Inverse Characterization Method For Draping Simulation Based On Automatic Measurement Of Fiber Orientation
FibreMap project aims at the development of an automatic quality control and feedback mechanism to improve draping of carbon fibers on complex parts. There is a strong need in the automotive industry for automatic…
Composites Draping Simulation, PAM-FORM, PLASFIB, PAM-OPT, Inverse Characterization, Optimization Methods, Shear Behaviour
Accurate Liquid Resin Infusion simulation through a Fluid-Solid coupled approach
The production rates increase in aerospace industry implies a growing interest in composite manufacturing process simulation with a strong requirement on predictive accuracy. In this context, ESI enhances its PAM-…
Composites pam-composites
Draping simulation with a new finite element formulation involving an internal unit cell
Today finite element simulations for draping are based on anisotropic continuum mechanical models. Effects like fiber separation, fiber sliding and Poisson’s ratio greater than 0.5 are not describable with such an…
Composites pam-composites
Simulation Boosts the Use of Fiber Reinforced Thermoplastic Composite Materials for Mass Production
Thermoplastic composite materials promise many advantages for the mass production of high performance composite components. These materials made of melt-processable resins are light, stiff, have an infinite shelf life,…
Composites composites, fiber reinforced, thermoplastic
Effect of curing overheating on interlaminar shear strength and its modelling in thick FRP laminates
During the curing process, the exothermic crosslinking reaction inside epoxy resin-based composites causes overheating and, eventually, a thermal degradation of the matrix. Thick sectioned epoxy composites require an…
Composites Prepreg,Thermosetting resin, Cure behaviour, Mechanical testing
Automated Tape Laying (ATL) Process Simulation Through 3D Thermo-Mechanical Model
The present paper describes the current state of work done during the STELLAR project on the ATP/ATL simulation. To assess the welding quality of the thermoplastic tapes, the computation of the contact pressure, the…
Composites ATL process, FE simulation, thermo-mechanical simulation, laser model, tool kinematic