Tips & Tricks

Solid elements morphing by twist in Visual Mesh

In the case of 3D meshes, the term morph can be interpreted as the change of appearance of a graphical object. The morphing process is then defined as the construction of an animated sequence corresponding to the gradual transition between two different objects, so-called source (initial) and target (final) models. The objective of a morphing method is to compute a transformation ensuring a visually pleasant transition between the two, source and target shapes

Demonstrator of typical Stamp-Assembly process in automotive BiW manufacturing

New Stamp-Assembly non-confidential tutorial available

Visual-Assembly Overlap Resolve positioning

The most effective way how to position your distorted components into the clamping system.

Visual-Mesh for Assembly setup - How to create mesh for shell analysis from CAD.

Short video how to create shell mesh from CAD using Visual-Mesh application.

Delta T Offset For Bowing Effect in Assembly Process

In case of butt joint of two plates, in reality, there is an eccentricity e between the neutral phase of bending and the centre of the tendon force caused by the weld which causes the typical horse saddle of a butt welded flat plate.. A functionality Delta T Offset  has been developed in order to overcome the limitation due to the shrinkage methodology that cannot provide correct results for a butt joint with a non-symmetrical welding. With this new development, it will be possible to apply an offset value on the thermal loading between upper and lower surfaces of shell. In consequence, the horse saddle effect of a butt welded flat plate is produced with Assembly solution.

SEA : License error on the windows client side

License error on the windows client side But ping server works ok...->>Check the client firewall(s)! might have to be off

complex impedance spectrum from an NCT

How do I create a complex impedance spectrum from an NCT?,This can be achieved by using the standard utility script under FE & BEM Utilities > Create > Create Area Isolator from NCT.

Virtual TL: which surface is used in the computation

Virtual TL: which surface is used in the computation The area is obtained by the first layer, emission side.

How do I get sensor values using scripting?

Script prints Real and Imag values of selected sensor Usage: Run the script and specify the output results

Is there a QuickScript function to clear the undo buffer?

Use GUI_SendCommand(33124) It refreshes the 3D window and clears the undo-buffer.