Tips & Tricks

Using the Construction Plane in CFD-GEOM

Point entities in CFD-GEOM are placed in an XYZ (Cartesian) coordinate system. The Construction Plane tool enables you to position a plane in space, and place points on that plane to generate curve entities.

Hole Detection Feature in CFD-VisCART

CFD-VisCART can handle geometries with small gaps, cracks and overlapping parts, but what if there is a big hole or opening in one of the parts that the user is not aware of? The grid will flow through this opening and the result will be a mesh that has cells both inside and outside the model. This leaves the user with the near impossible task of finding this opening. In CFD-VisCART, a Hole Detection feature has been introduced that performs this task for the user.

Distance Measuring Tool in CFD-VisCART

CFD-VisCART has a simple and easy-to-use tool for measuring the distance between two points in a geometry. This tool can be found under the Geom tab.

Clipping of X, Y, Z, Arbitrary Cuts and Iso-Surfaces in CFD-VIEW

In CFD-VIEW, performing X, Y, Z, arbitrary cut and iso-surface operations on volumes yield surface objects. One may desire to visualize and/or perform calculations in a user specified spatial range of the surface instead of the whole surface.

Blanking Option in CFD-VIEW for Visualizing Chimera Grids

CFD-FASTRAN uses closed surfaces, such as walls or blocked regions, to create Chimera holes (or blanked regions) in a grid. By default, the number of buffer layers is set to 1. This means that a closed surface will cut a hole in any mesh that overlaps it, and the initial "blanking" of grid cells defines the hole.

Using CFD-VIEW Display Types

When post processing a simulation in CFD-VIEW, you will often be working with multiple types of objects. Volumes and Surfaces are two types objects that you will most definitely have whether the model is 2D or 3D.

CFD-GEOM Viewer Hot Keys

Most of the time users deal with real world problems which are usually 3D. 3D geometries and grid generation can be difficult to mesh depending on the complexity of the geometry. Working with 3D geometry and grid generation can be made lot faster with effective use of the Hot Keys available in CFD-GEOM.

Surface Projection in CFD-GEOM

The Project Surface tool of CFD-GEOM allows the projection of a single surface onto a collection of surfaces. The collection of surfaces may contain gaps and overlaps, and the resulting projected surface will then covers these imperfections.

Using Radial Extrusion in CFD-GEOM

The Radial Extrusion tool allows you to extrude structured faces and unstructured surface grids about a specified axis. Extrusion is performed radially about a user-specified axis, typically the center line of the collection of entities being extruded. A variety of options exist for specifying the reference axis and for controlling certain aspects of the extrusion.

Using Interior Sources for Mesh Control in CFD-GEOM

To produce accurate simulation results, it is important to provide adequate mesh resolution in the areas of the model where steep solution gradients are expected. In CFD-GEOM, there are a number of tools available to achieve mesh refinement. One such tool for refining unstructured grids is the interior source option.